14

2023

-

08

How to maintain the pump when not in use?


When the water pump is not in use, it cannot be placed randomly. In order to prolong its service life, it needs to be reasonably maintained. For the southern water pump that is not used, it should be placed in a dry, clean or non-corrosive gas environment to prevent some polluting gases from corroding the equipment.

 

Before the water pump is used, the grounding wire must be firm, and at the same time, check whether each terminal is firm, and check whether the power supply voltage and rated voltage are consistent.

 

If in the process of use, there is an abnormal phenomenon such as abnormal noise, to immediately stop, check the cause, until the exception can be put into normal use. Of course, the southern water pump is not suitable for idling, because the motor can reach about 10000 r/min meters without load, and the pump will be stopped immediately after suction is completed. Otherwise it will wear out, universal joint impeller, serious damage to the pump tube.

 

For pumps that are not in use, regular inspections should be carried out. Usually not less than three months to check once. During maintenance, it is best to disassemble all the internal dust and oil stains. If damaged parts are found, they should be replaced in time.

 

In short, for pumps that are not used, they cannot be maintained because they are not used. Reasonable maintenance is the key to extending the service life of the equipment.


08

/

14

Related News

Pump Technology Helps Improve Farmland Irrigation Efficiency

With the continuous increase of population and the advancement of urbanization, the problem of farmland irrigation is becoming more and more important. Effective farmland irrigation is the key to ensure crop growth and agricultural production. However, traditional irrigation methods have problems such as waste of water resources, high energy consumption, and complex operation. In order to solve these problems, new water pump technology came into being, and achieved remarkable results, helping to improve the efficiency of farmland irrigation.

08

/

14

Related News

How to maintain the pump when not in use?

When the water pump is not in use, it cannot be placed randomly. In order to prolong its service life, it needs to be reasonably maintained. For the southern water pump that is not used, it should be placed in a dry, clean or non-corrosive gas environment to prevent some polluting gases from corroding the equipment.

08

/

14

Related News

The greater the power, the better the pump?

Water pump is a kind of special equipment for water transportation, which mainly realizes the transportation of water from one side to the other, so it will be used in many fields. However, many people due to the lack of knowledge of the relevant understanding of the pump, therefore, in the use of time there is a question, is not the greater the power of the pump, the better?

08

/

25

Related News

What are the types of pumps?

Pumping station refers to a pumping system composed of mechanical and electrical equipment and supporting buildings with a pump as the core. The pump alone can not work, it needs to work with the power machine, transmission equipment, pipelines and various auxiliary, control equipment to form a complete pumping device to work. In order to ensure the normal work of mechanical and electrical equipment and management personnel, and provide a good water flow condition for the safe and efficient operation of the pump, it is also necessary to build various supporting buildings such as water pump house, water intake buildings, power transformation and distribution facilities, thus forming a water pumping station engineering hub. Water pumping station according to its different characteristics, roughly the following classification.