25

2023

-

08

Water pump energy saving eight tips


1. Try to shorten the pipeline.

2. No "anti-aircraft gun" type outlet pipe. Because this outlet pipe increases energy consumption. At the same time, make the water outlet of the pump facing the pool.

3. Increase the diameter of the outlet pipe as much as possible.

4. Clear the blockage in the pipeline in time. Foreign matter left in the inlet pipe, impeller or guide shell flow channel, will reduce the amount of water.

5, try to use the coupling direct transmission, this is because the coupling direct transmission ratio belt transmission efficiency.

6, under the premise of ensuring the cleanliness of the water, the filter screen can be removed.

7. Check the sealing parts of the water pump carefully to prevent the water pump from entering the air. If the water pump into the air, the amount of water will be significantly reduced.

8. If you can use a motor, you don't need a diesel engine or a gasoline engine, and if you can use a three-phase asynchronous motor, you don't need a single-phase asynchronous motor.


08

/

14

Related News

Pump Technology Helps Improve Farmland Irrigation Efficiency

With the continuous increase of population and the advancement of urbanization, the problem of farmland irrigation is becoming more and more important. Effective farmland irrigation is the key to ensure crop growth and agricultural production. However, traditional irrigation methods have problems such as waste of water resources, high energy consumption, and complex operation. In order to solve these problems, new water pump technology came into being, and achieved remarkable results, helping to improve the efficiency of farmland irrigation.

08

/

14

Related News

How to maintain the pump when not in use?

When the water pump is not in use, it cannot be placed randomly. In order to prolong its service life, it needs to be reasonably maintained. For the southern water pump that is not used, it should be placed in a dry, clean or non-corrosive gas environment to prevent some polluting gases from corroding the equipment.

08

/

14

Related News

The greater the power, the better the pump?

Water pump is a kind of special equipment for water transportation, which mainly realizes the transportation of water from one side to the other, so it will be used in many fields. However, many people due to the lack of knowledge of the relevant understanding of the pump, therefore, in the use of time there is a question, is not the greater the power of the pump, the better?

08

/

25

Related News

What are the types of pumps?

Pumping station refers to a pumping system composed of mechanical and electrical equipment and supporting buildings with a pump as the core. The pump alone can not work, it needs to work with the power machine, transmission equipment, pipelines and various auxiliary, control equipment to form a complete pumping device to work. In order to ensure the normal work of mechanical and electrical equipment and management personnel, and provide a good water flow condition for the safe and efficient operation of the pump, it is also necessary to build various supporting buildings such as water pump house, water intake buildings, power transformation and distribution facilities, thus forming a water pumping station engineering hub. Water pumping station according to its different characteristics, roughly the following classification.